Part Number Hot Search : 
X25040SM TPS25LB 93C66A 0LZEM8X 1N966B N74ACT WSR5LFEK 2ZNU03
Product Description
Full Text Search
 

To Download MAAP-000072-SMB003 Datasheet File

  If you can't view the Datasheet, Please click here to try to view without PDF Reader .  
 
 


  Datasheet File OCR Text:
 RoHS Compliant
Amplifier, Power, 1.3W 17.7-19.7 GHz
Features
1.3 Watt Saturated Output Power Level Variable Drain Voltage (4-10V) Operation MSAGTM Process
MAAP-000072-PKG003
Rev -- Advance Information
Description
The MAAP-000072-PKG0003 is a 4-stage 1.3 W power amplifier with on-chip bias networks in a 20 lead MLP package, allowing easy assembly. This product is fully matched to 50 ohms on both the input and output. It can be used as a power amplifier stage or as a driver stage in high power applications. Each device is 100% RF tested to ensure performance compliance. The part is fabricated using M/A-COM's GaAs Multifunction Self-Aligned Gate (MSAG) Process. M/A-COM's MSAGTM process features robust silicon-like manufacturing processes, planar processing of ion implanted transistors and multiple implant capability enabling power, low-noise, switch and digital FETs on a single chip. The use of refractory metals and the absence of platinum in the gate metal formulation prevents hydrogen poisoning when employed in hermetic packaging.
YYWW AP072G XXXX MACOM
Primary Applications
Point-to-Point Radios 18 GHz Band
Also Available in:
Description Part Number Die MAAPGM0072-DIE Ceramic Package MAAPGM0072 Die Sample Board MAAP-000072-SMB004 Die Mechanical Sample MAAP-000071-MCH000 Packaged Sample Board MAAP-000072-SMB003 (Lead Free)
Electrical Characteristics: TB = 40C1, Z0 = 50 , VDD = 8V, IDQ = 500mA2, Pin = 12 dBm, RG = 200
Parameter Bandwidth Output Power 1-dB Compression Point Small Signal Gain Input VSWR Output VSWR Gate Current Drain Current 1. 2. Symbol f POUT P1dB G VSWR VSWR IGG IDD Typical 17.7-19.7 31 30 19 2.0:1 1.6:1 10 750 mA mA Units GHz dBm dBm dB
1
TB = MMIC Base Temperature Adjust VGG between -2.6 and -1.2V to achieve specified Idq.
M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. M/A-COM makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does M/A-COM assume any liability whatsoever arising out of the use or application of any product(s) or information.
* North America Tel: 800.366.2266 / Fax: 978.366.2266 * Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 * Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 Visit www.macom.com for additional data sheets and product information.
RoHS Compliant
Amplifier, Power, 1.3W 17.7-19.7 GHz
Maximum Operating Conditions 3
Parameter Input Power Drain Supply Voltage Gate Supply Voltage Quiescent Drain Current (No RF) Quiescent DC Power Dissipated (No RF) Junction Temperature Storage Temperature Symbol PIN VDD VGG IDQ PDISS TJ TSTG Absolute Maximum 17.0 +12.0 -3.0 790 7.9 170 -55 to +150 Units dBm V V mA W C C
MAAP-000072-PKG003
Rev -- Advance Information
3. Operation beyond these limits may result in permanent damage to the part.
Recommended Operating Conditions4
Characteristic Drain Voltage Gate Voltage Input Power Junction Temperature Thermal Resistance MMIC Base Temperature Symbol VDD VGG PIN TJ JC TB 16.4 Note 4 Min 4.0 -2.6 Typ 8.0 -2.0 12.0 Max 10.0 -1.2 14.0 150 Unit V V dBm C C/W C
4. MMIC Base Temperature = 170C -- JC* VDD * IDQ 5. Operation outside of these ranges may reduce product reliability.
Operating Instructions
This device is static sensitive. Please handle with care. To operate the device, follow these steps. 1. Apply VGG = -2.7 V, VDD= 0 V. 2. Ramp VDD to desired voltage, typically 8.0 V. 3. Adjust VGG to set IDQ, (approximately @ -2.0 V). 4. Set RF input.
5. Power down sequence in reverse. Turn VGG off
last.
2
M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. M/A-COM makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does M/A-COM assume any liability whatsoever arising out of the use or application of any product(s) or information.
* North America Tel: 800.366.2266 / Fax: 978.366.2266 * Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 * Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 Visit www.macom.com for additional data sheets and product information.
RoHS Compliant
Amplifier, Power, 1.3W 17.7-19.7 GHz
MAAP-000072-PKG003
Rev -- Advance Information
Figure 1. 5x5 mm 20-Lead MLP.
As close to the package as possible VDD
100pF 0.1F
YYWW AP072G XXXX MACOM
VGG As close to the package as possible
200
100pF
0.1F
Figure 2. Recommended Bias Configuration.
Note: The exposed pad centered on the package bottom must be connected to RF and dc ground for proper electrical and thermal operation.
Refer to M/A-COM Application Note Surface Mounting Instructions for PQFN Packages #S2083* for assembly guidelines. Additional Precaution: All parts must receive a bake-out of 125C for 24 hours prior to any solder reflow operation. *Application Notes can be found by going to the Site Search Page of M/A-COM's web page (http://www.macom.com/Application%20Notes/ index.htm) and searching for the required Application Note.
M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. M/A-COM makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does M/A-COM assume any liability whatsoever arising out of the use or application of any product(s) or information.
3
* North America Tel: 800.366.2266 / Fax: 978.366.2266 * Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 * Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 Visit www.macom.com for additional data sheets and product information.
RoHS Compliant
Amplifier, Power, 1.3W 17.7-19.7 GHz
MAAP-000072-PKG003
Rev -- Advance Information
YYWW APO72G XXXX MACOM
Figure 3. Demonstration Board PN MAAP-000072-SMB003 (available upon request).
4
M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. M/A-COM makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does M/A-COM assume any liability whatsoever arising out of the use or application of any product(s) or information.
* North America Tel: 800.366.2266 / Fax: 978.366.2266 * Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 * Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 Visit www.macom.com for additional data sheets and product information.


▲Up To Search▲   

 
Price & Availability of MAAP-000072-SMB003

All Rights Reserved © IC-ON-LINE 2003 - 2022  

[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy]
Mirror Sites :  [www.datasheet.hk]   [www.maxim4u.com]  [www.ic-on-line.cn] [www.ic-on-line.com] [www.ic-on-line.net] [www.alldatasheet.com.cn] [www.gdcy.com]  [www.gdcy.net]


 . . . . .
  We use cookies to deliver the best possible web experience and assist with our advertising efforts. By continuing to use this site, you consent to the use of cookies. For more information on cookies, please take a look at our Privacy Policy. X